Samsung Samsung PS42D4S all parts [SM] free download

File name Samsung_PS42D4S_all_parts_[SM].zip

Alignment and Adjustments 2. Alignment and Adjustments 2-1 Service Mode 2-1-1 SERVICE MODE Entry Method (General Transmitter) Using the Customer Remote 1. Turn the power off and set to stand-by mode. 2. Press the remote buttons in this order; POWER OFF-INFO-MENU-MUTE-POWER ON to turn the set on. 3. The set turns on and enters service mode. Using the Factory Remote 1. Turn the power on. 2. Press the remote buttons in this order : Display-Factory. 3. The set enters service mode. * If you fail to enter service mode, repeat steps 1 and 2 above. 2-1-2 Initial SERVICE MODE DISPLAY State 2-1-2(A) OSD DISPLAY Factory Mode Current Input Mode Indicates selected input mode 01. Picture Improvement Picture Adjustment 02. Initial Setting Setting the Initial Values 03. PIP/TTX/Test Pattern Setting the Special Features 04. Option-1 Options-1 : Particulars Product Options 05. Option-2 Options-2 : PDP Properties Options 06. Reset Initializing after saving the adjustments Software Version Information Release : 2004-05-20-16:30 Version : T-NELPCI-1029 2-1-2(B) Button Operations in SERVICE MODE Menu Displays all menus UP/DOWN Cursor moves to select items LEFT/RIGHT To increase and decrease the data of the selected items (ENTER) Confirm your choice(Store OR Enter) TV/VIDEO Button Change input source * While in Tuner mode, the direct access buttons can be used to select and change channels. Samsung Electronics 2-1 Alignment and Adjustments 2-2 WHITE Balance Coordinates 2-2-1 PS42D4S/PS42V4S White Balance Adjustment 1. W/B Adjustment is required for the following six modes : DVI -> Component(720p) -> Component(1080i) -> PC -> VIDEO (Video port) -> VIDEO (Graphic port) 2. Adjustment Method (Signal equipment : MSPG-925LTH, Measurement equipment : CA210) MSPG-925LTH Equipment that outputs analog and digital signals simultaneously (Analog / Digital signal output / TV signal output (S-Video included) / HDTV signal output) -. Digital Serial : TMDS (DVI24, SiI160) + DVI-I (Analog, Digital) -. Monitor Signal (Analog): R, G, B, HS, VS, CS -. TV Signal(CVBS) : NTSC M, NTSC J (7.5 IRE On/Off) (BNC or RCA), PAL B, D, G, H, I, PAL M, Nc -. D-TV Signal (1080i, 720p, 480p) MSPG-925 is used to adjust the W/B. CA210 : Color Analyzers adjusting brightness,